How to Pair Koss The Plug Wireless with Your Devices

By Koss Stereophones | Published: 2026-10-28

Category: Guides pratiques

Learn how to pair Koss The Plug Wireless earbuds with your phone, tablet, or laptop. Follow these simple steps and troubleshooting tips for a reliable Bluetooth connection.

Quick answer

To pair Koss The Plug Wireless, put the earbuds in pairing mode by holding the power button until the LED flashes, then select 'The Plug Wireless' from your device's Bluetooth menu. Once paired, they will reconnect automatically when powered on.

Why pairing sometimes fails

Bluetooth pairing usually works on the first try, but a few common mistakes can cause frustration. The most frequent issue is that the earbuds are not fully in pairing mode, or your device has a stale connection from a previous pairing.

Another reason is that the earbuds are already connected to another device, so they won't appear in the discovery list. Turning off Bluetooth on that device or simply powering the earbuds off and on again can reset the connection.

Battery level also matters. If the battery is very low, the earbuds may not enter pairing mode reliably, so charge them fully before starting.

Pairing steps

Charge the earbuds: Connect The Plug Wireless to a power source using the included charging cable and wait until the battery is sufficiently charged. A low battery can prevent pairing mode from activating. Check that the charging cable is securely connected and the LED indicator lights up.
Power on and enter pairing mode: Press and hold the power button for about 5 seconds until the LED flashes red and blue (or the indicator pattern described in the manual). This signals that the earbuds are discoverable. If the LED does not flash, release the button and try again; ensure you are holding it long enough.
Enable Bluetooth on your device: On your phone, tablet, or computer, open the Bluetooth settings and turn on Bluetooth. Make sure the device is in discovery mode, as some devices require you to tap 'Pair New Device'. Keep the earbuds close to your device (within 3 feet) to avoid signal interference.
Select 'The Plug Wireless': From the list of available devices, tap or click 'The Plug Wireless'. If prompted for a PIN, enter '0000' or '1234', which are common defaults. If the earbuds do not appear, turn off Bluetooth and turn it back on, then repeat the pairing mode step.
Confirm and test the connection: Once connected, you will hear a confirmation tone or see a solid LED. Play a short audio clip to verify sound comes through the earbuds. If the audio cuts out, move closer to the device and check for obstacles between them.
Troubleshoot if needed: If the earbuds fail to pair, try forgetting the device in your Bluetooth settings and starting over. If that doesn't work, reset the earbuds by powering them off and on again, or consult the manual for a factory reset procedure. Ensure no other device is actively connected to the earbuds; disconnect it first if necessary.

Product facts

The Plug Wireless: The Plug Wireless Bluetooth® In-Ear Headphones feature 6+ Hour Battery (Rechargeable) and an In-Line Microphone & Remote for taking calls and controlling music. You can enjoy long listening sessions and easily manage calls and music without reaching for your phone, making the pairing process more convenient once connected.
The Plug Wireless