How to Replace Silicone Ear Cushions on Over Ear Headphones

Quick Answer

Remove the old ear cushions, align the new silicone ear cushions with the headphone housing, and press them firmly into place until they snap or sit securely.

Step-by-Step Replacement Guide

1. Remove the Old Cushions: Gently peel or twist the old ear cushions away from the headphone housing. They may be held by a snap ring or adhesive. Work slowly to avoid damaging the speaker mesh. Common mistake: pulling too hard can tear the cushion or loosen internal components. Use a plastic spudger if needed.
2. Clean the Housing: Wipe the headphone housing with a dry or slightly damp cloth to remove dust, oil, and debris. Let it dry completely before installing the new cushions. Checkpoint: Ensure no moisture remains, as it can affect adhesion or cause squeaking.
3. Align the New Silicone Cushion: Position the silicone cushion so that its groove or lip matches the housing edge. The cushion should sit evenly without twisting. Common mistake: misalignment can cause the cushion to pop off or create uneven pressure on your ears.
4. Press and Secure: Press the cushion firmly around the entire perimeter until it clicks or sits flush. For snap-on designs, you may hear a faint snap. For stretch-fit designs, ensure the cushion fully covers the housing rim. Checkpoint: Run your finger along the edge to confirm there are no gaps. A loose cushion can affect bass response.
5. Repeat for the Other Earcup: Follow the same steps for the second earcup. Use the same orientation to maintain symmetry. Final check: Wear the headphones briefly to test comfort and sound. If the cushion shifts, re-seat it.

Product Facts

• Silicone Ear Cushion Pack: The Koss Silicone Ear Cushion Pack is a replacement cushion set compatible with KEB40, KE29, Mirage, and KEB24 models. Ensures you choose the correct cushions for a secure fit and optimal sound isolation.