How to Replace Ear Cushions on Koss KSC75
By Koss Stereophones | Published: 2026-10-22
Category: How-to Guides
Learn how to replace ear cushions on Koss KSC75 stereophones with this simple step-by-step guide. Keep your headphones comfortable and sounding great.
Quick Answer
To replace the ear cushions on your Koss KSC75, gently pull the old cushion off the speaker housing, align the new cushion's opening with the housing, and press it into place. It takes less than a minute per side.
Why Replace KSC75 Ear Cushions?
Over time, the foam in your KSC75 ear cushions can compress, flatten, or even crack. This not only reduces comfort but can also affect the sound by letting the driver sit closer to your ear or allowing sound to leak. Replacing them restores the original fit and keeps the headphones pleasant to wear for long listening sessions.
The KSC75 ear cushion replacement is an inexpensive maintenance step. Because the cushions are a simple push-fit design, you can do it at home without any tools.
What You Need
All you need is a new pair of KSC75 ear cushions. The official Koss KSC75 Ear Cushion accessory comes with two pairs, so you'll have a spare set ready for the next time. No adhesive, screwdrivers, or special skills are required.
Step-by-Step Replacement Guide
- Remove the old cushion: Hold the KSC75 speaker housing in one hand and grip the foam cushion with the other. Gently pull the cushion away from the housing. It should slide off without much resistance. If it feels stuck, work your fingers around the edge to loosen it. Do not use sharp tools; they can scratch the driver or housing.
- Orient the new cushion: Take one of the new ear cushions and identify the opening on the back side. Make sure the cushion is not twisted; the opening should align with the shape of the speaker housing. Check that the cushion is not flipped inside out before pressing it on.
- Press the cushion onto the housing: Place the opening of the new cushion over the speaker housing and press down evenly around the rim. You should feel it snap or seat into place. Run your finger around the edge to ensure it is fully seated. If the cushion feels loose, press it again around the entire circumference.
- Repeat for the other side: Repeat the same process for the other ear cushion. After both are installed, give them a gentle tug to confirm they are secure. Test the fit by wearing the headphones for a minute; they should feel snug and comfortable.
Product Fact
- KSC75 Ear Cushion: The Koss KSC75 Ear Cushion is a replacement cushion accessory for Koss KSC75 stereophones and includes two pairs of ear cushions. You get a spare set right away, so you can replace both sides now and keep a backup for later.
KSC75 Ear Cushion
